PF455S插秧機及其側離合器手柄的探討和改善設計
- 文件介紹:
- 該文件為 rar 格式(源文件可編輯),下載需要
20 積分
-

- 00407-PF455S插秧機及其側離合器手柄的探討和改善設計.rar
摘 要
本文主要介紹了有關當前中國從韓國引進的PF455S動力插秧機的主要原理,特征和性能,以及在使用過程中出現的與中國土地種植環境的差異而出現的問題,比如說:并對此問題,作了研究,提出了一些解決方案。由于篇幅有限,本文在解決方案上主要介紹了側離合器手柄的探討與改進設計。針對此問題列出了不同的方案,最總經過方案比較,考慮高效、穩定和經濟的方案,使插秧機的性能得到進一步的完善。
關鍵詞:PF455S插秧機 側離合器手柄 改進設計
Abstract
Cardinal principle about present PF455S power Rice transplanter introduced from Korea S. of China of main introduction of this text, Characteristic and performance, and appear in the course of using plant problem that difference appear of environment with Chinese land, And this question, have been studied, has put forward some solutions. Because space limited, this text main introduction incline clutch discussion and improvement of handle design at solution. List different scheme to question this , compare scheme always most, Consider that high-efficient, stability and economic scheme, make the performance of the seeding machine get further perfection.
Keywords:PF455S Rice Transplanter Incline the clutch handle Improve and design
目 錄
引言 ……………………………………………………………………………………………………………….1
1 正文 ………………………………………………………………………3
1.1總體方案論證 …………………………………………………………………… 3
1.1.1PF455S插秧機的動力傳遞 …………………………………………………… 5
1.1.1.1驅動和轉向驅動路線 …………………………………………………… 6
1.1.1.2插植臂驅動和株距調整傳動路線……………………………………………7
1.1.1.3苗箱移動及橫向送秧量的調節………………………………………………8
1.1.1.4 縱向送秧傳動路線 …………………………………………………………8
1.1.2插秧機主要部件的構造…………………………………………………………8
1.1.2.1 發動機…………………………………………………………………………8
1.1.2.2 主變速箱……………………………………………………………………11
1.1.2.3 插植臂基本構造及工作原理..……………………………………………12
1.1.2.4 插植鏈輪箱基本構造……..………………………………………………12
1.2計算部分………………………………………………………………………… 18
1.2.1幾何尺寸的確認計算……………….…………………………………………18
1.2..2材料硬度的校核計算……………………………………………………………19
1.2.3螺栓校核計算 ………………………………………………………………21
1.3 設計部分 …………………………………………………………………………23
1.3.1對于調速手柄附和板的改進設計 ……………………………………………23
1.3.2 對于附著板的改進設計 ……………………………………………………24
2 結論 ………………………………………………………………………………26
致謝 ………………………………………………………………………………… 27
參考文獻 ………………………………………………………………………………28
附件清單……………………………………………………………………………… 2
...